WN604 Firmware Version 3.3.2

New Features & Enhancements

• Supports European CE Adaptivity requirement

Fixed Issues

• Fixed security issue where passwords and IDS/IPS mail password are stored and exchanged in plain text format
• Fixed the security issue where authentication is missing for critical functions
• Fixed the issue that reset password is not taking effect in certain cases
• Fixed GUI login issue when the password is changed to “password&\\\\n&#7610”
• Removed force change default password mechanism from 3.3.1

Known Issues

1. Wireless clients will not able to associate to the AP when the “Keep existing wireless settings” is unchecked
2. When upgrading from previous RC firmware to this firmware will take around 6minutes for upgrade complete as the clear text password and passphrase keys will be encrypted which takes time for the first time only. Future firmware upgrade will not have this issue.

NOTES:

1. The default IP address of the AP is 192.168.0.100

2. In the following scenarios AP is expected to reboot automatically for the configuration to take effect:
   1. Change Country/Region
   2. After Firmware upgrade
   3. After Restore Configuration Settings
   4. Reset factory defaults

3. With Rogue AP and more than 2 VAPs (security profiles) enabled, the beacon interval of the AP will be automatically updated for better performance of the Rogue AP algorithm. We recommend not to reconfigure the beacon interval below the suggested value. Anything above the suggested value is fine.
   1. 1 or 2 VAPs enabled, beacon interval is 100ms
   2. 3 VAPs enabled, beacon interval is 41ms x 3 = 123ms
   3. 4 VAPs enabled, beacon interval is 41ms x 4 = 164ms
   4. 5 VAPs enabled, beacon interval is 41ms x 5 = 205ms
   5. 6 VAPs enabled, beacon interval is 41ms x 6 = 246ms
   6. 7 VAPs enabled, beacon interval is 41ms x 7 = 287ms
   7. 8 VAPs enabled, beacon interval is 41ms x 8 = 328ms

4. Product Registration feature is available in this build. This feature allows the user to register the product with NETGEAR for better support. The product registration is available in two methods.In the first method, the product registration popup window will automatically open if the internet connection is available and the device serial number is not registered with NETGEAR.